So sánh vật liệu
Thông số kỹ thuật
| optical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Innovia Films Ltd./Propafilm™ MVU60 |
|---|---|---|---|
| gloss | 20° | ASTM D2457 | 105 |
| turbidity | ASTM D1003 | 2.0 % |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Innovia Films Ltd./Propafilm™ MVU60 |
|---|---|---|---|
| Friction coefficient | Itself - Static,外层/外层 | ASTM D1894 | 0.50 |
| Itself - Dynamic,外层/外层 | ASTM D1894 | 0.50 |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Innovia Films Ltd./Propafilm™ MVU60 |
|---|---|---|---|
| Shrinkage rate | TD:129°C,1分钟 | Internal Method | -1.0 % |
| MD:129°C,1分钟 | Internal Method | 6.0 % |
| film | Điều kiện kiểm tra | Phương pháp kiểm tra | Innovia Films Ltd./Propafilm™ MVU60 |
|---|---|---|---|
| Initial sealing temperature | Internal Method | 116to146 °C | |
| Oxygen permeability | 23°C,0%RH | ASTMF1927 | 81 cm³·mm/m²/atm/24hr |
| tensile strength | MD:Yield | ASTM D882 | 239 MPa |
| TD:Yield | ASTM D882 | 190 MPa | |
| Water vapor permeability | 38°C,90%RH | ASTMF1770 | 10 g/m²/24hr |
| film thickness | Internal Method | 60.0 | |
| Secant modulus | 1%Secant,MD | ASTM D882 | 2690 MPa |
| Sealing emphasis | Internal Method | 0.14 N/mm | |
| Secant modulus | 1%Secant,TD | ASTM D882 | 2290 MPa |
| elongation | MD:Break | ASTM D882 | 90 % |
| CoronaTreatment | Internal Method | 38 dyne/cm | |
| elongation | TD:Break | ASTM D882 | 130 % |
| consumption | Internal Method | 73.5 m²/kg |
