So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

Polyester, TS UP 802 Hexion Inc.

--

--

--

- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Charpy Notched Impact Strength23°CISO 179/1eA3.5 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU6.5 kJ/m²
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
bending strengthISO 178100 MPa
Bending modulusISO 17812500 MPa
Compressive stressISO 604250 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Hot deformation temperature8.0MPa,UnannealedISO 75-2/C185 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Shrinkage rateISO 25770.20 %
Apparent densityISO 600.89 g/cm³
density23°CISO 11831.98 g/cm³
Water absorption rateISO 6225.0 mg
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Dielectric strength1.00mmIEC 60243-126 kV/mm
Volume resistivityIEC 600931E+13 ohms·cm
Relative permittivity100HzIEC 602505.50
Dissipation factor100HzIEC 602500.020
Surface resistivityIEC 600931E+12 ohms
Compared to the anti leakage trace indexSolutionAIEC 60112PLC 0
hardnessĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Ball Pressure TestH961/30ISO 2039-1360 MPa
Supplementary InformationĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 802
Compression molding pressure>15.0 MPa
Compression molding temperature160to190 °C