So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PPO(PPE) PREPERM® 255 Premix Oy
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
Suspended wall beam without notch impact strength-20°CISO 180无断裂
-78°CISO 180无断裂
Impact strength of cantilever beam gap23°CISO 18020 kJ/m²
-78°CISO 18010 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180无断裂
Impact strength of cantilever beam gap-20°CISO 18010 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
UL flame retardant rating4.0mmUL 94V-1
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
Tensile strainBreak,4.00mmISO 527-240 %
tensile strength4.00mmISO 527-245.0 MPa
Tensile strainYield,4.00mmISO 527-210 %
Bending modulus4.00mmISO 1782200 MPa
tensile strengthYield,4.00mmISO 527-265.0 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Af167 °C
Vicat softening temperature--ISO 306/B50160 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/Bf190 °C
Vicat softening temperature--ISO 306/A50210 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
Shrinkage rateMDISO 294-40.90 %
densityISO 11831.05 g/cm³
melt mass-flow rate300°C/2.16kgISO 11335.0 g/10min
300°C/5.0kgISO 113315 g/10min
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traPremix Oy/PREPERM® 255
Dielectric constant1.00GHzInternal Method2.55
Dissipation factor1.00GHzInternal Method5E-04