So sánh vật liệu
Thông số kỹ thuật
impact performance | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | kJ/m² | 11 20 |
Impact strength of simply supported beam without notch | -30°C | kJ/m² | 65 70 |
Charpy Notched Impact Strength | -30°C | kJ/m² | 8.0 9.0 |
Impact strength of simply supported beam without notch | 23°C | kJ/m² | 75 90 |
flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Flammability level | 0.8mm | HB -- |
mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Tensile modulus | MPa | 9500 6000 | |
Tensile strain | Break | % | 5.0 10 |
tensile strength | Break | MPa | 185 125 |
thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Linear coefficient of thermal expansion | TD | cm/cm/°C | 1.1E-04 -- |
Melting temperature | °C | 222 -- | |
Continuous use temperature | --4 | °C | 200 -- |
Hot deformation temperature | 8.0MPa,Unannealed | °C | 135 -- |
Linear coefficient of thermal expansion | MD | cm/cm/°C | 2E-05 -- |
Continuous use temperature | --3 | °C | 100to120 -- |
Hot deformation temperature | 1.8MPa,Unannealed | °C | 205 -- |
Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Shrinkage rate | TD | % | 0.80 -- |
Water absorption rate | Saturation,23°C | % | 7.0 -- |
Shrinkage rate | MD | % | 0.10 -- |
Water absorption rate | Equilibrium,23°C,50%RH | % | 2.0 -- |
density | g/cm³ | 1.35 -- |
Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Surface resistivity | ohms | -- 1E+12 | |
Compared to the anti leakage trace index | V | -- | |
Volume resistivity | ohms·cm | 1E+14 1E+13 | |
Dielectric strength | kV/mm | 40 37 |
hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | EMS-GRIVORY/Grilon® BG-30/2 |
---|---|---|---|
Ball Pressure Test | MPa | 210 100 |