So sánh vật liệu
Thông số kỹ thuật
elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | Nantex Industry Co., Ltd./NANCAR® 3365 |
---|---|---|---|
Permanent compression deformation | 100°C,70hr | ASTM D395 | 55 % |
tensile strength | 300%Strain5 | ASTM D412 | 9.32 MPa |
elongation | Break7 | ASTM D412 | 560 % |
Break6 | ASTM D412 | 580 % | |
tensile strength | 300%Strain7 | ASTM D412 | 11.4 MPa |
300%Strain6 | ASTM D412 | 10.5 MPa | |
Yield4 | ASTM D412 | 27.8 MPa | |
Yield2 | ASTM D412 | 27.3 MPa | |
Yield3 | ASTM D412 | 27.0 MPa | |
elongation | Break5 | ASTM D412 | 620 % |
tear strength | ASTM D624 | 56.9 kN/m |
thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Nantex Industry Co., Ltd./NANCAR® 3365 |
---|---|---|---|
Heat loss | ASTM D5688 | 0.20 % |
Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Nantex Industry Co., Ltd./NANCAR® 3365 |
---|---|---|---|
density | 0.980 g/cm³ | ||
Soluble inMEK | 100 % | ||
bound acrylonitrile content | Internal Method | 33.0 % | |
stabilizer | Non-staining | ||
Mooney viscosity | ML1+4,100°C | ASTM D1646 | 62 MU |
hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Nantex Industry Co., Ltd./NANCAR® 3365 |
---|---|---|---|
Shore hardness | ShoreA2 | ASTM D2240 | 71 |
ShoreA4 | ASTM D2240 | 73 | |
ShoreA3 | ASTM D2240 | 72 |
aging | Điều kiện kiểm tra | Phương pháp kiểm tra | Nantex Industry Co., Ltd./NANCAR® 3365 |
---|---|---|---|
Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#3油中 | ASTM D471 | -9.0 |
ShoreA,100°C,70hr | ASTM D865 | 4.0 | |
Change rate of tensile strength in air | 100°C,70hr | ASTM D865 | -14 % |
Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -28 % |
Change rate of hardness (Shore) in the air | 支撐A,100°C,70hr,在ASTM#1油中 | ASTM D471 | 1.0 |
Change rate of ultimate elongation in air | 100°C,70hr,在ASTM#3油中 | ASTM D471 | -28 % |
Change rate of tensile strength in air | 100°C,70hr,在ASTM#1油中 | ASTM D471 | -11 % |
100°C,70hr,在ASTM#3油中 | ASTM D471 | -28 % | |
Change rate of ultimate elongation in air | 100°C,70hr | ASTM D865 | -38 % |
Volume change | 100°C,70hr,ASTM标准油(3号) | ASTM D471 | 16 % |
100°C,70hr,ASTM标准油(1号) | ASTM D471 | 0.40 % |