So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC LUBEMIX 65 BLACK LUBEN PLAST srl
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 65 BLACK
Impact strength of cantilever beam gap23°C4ASTM D25640to45 kJ/m²
23°CISO 180/A35to40 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA35to40 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Impact strength of cantilever beam gap23°C,3.20mmASTM D256A400to450 J/m
Suspended wall beam without notch impact strength23°CISO 180无断裂
Impact strength of cantilever beam gap23°C3ASTM D256无断裂
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 65 BLACK
Tensile strainBreakISO 527-2/1A/5035to40 %
bending strengthISO 17845.0to50.0 MPa
Tensile strainYieldISO 527-2/1A/504.0to6.0 %
tensile strengthBreakISO 527-2/1A/5040.0to45.0 MPa
Tensile modulusISO 527-2/1A/11800to2000 MPa
tensile strengthYieldISO 527-2/1A/5040.0to45.0 MPa
Bending modulusISO 1781800to2200 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 65 BLACK
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B120to130 °C
1.8MPa,Unannealed,3.20mmASTM D648100to110 °C
Vicat softening temperature--ISO 306/A120125to135 °C
--ISO 306/B120120to130 °C
Hot deformation temperature0.45MPa,Unannealed,3.20mmASTM D648115to125 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 65 BLACK
melt mass-flow rate260°C/5.0kgISO 113315to20 g/10min
densityISO 1183/A1.11to1.15 g/cm³