So sánh vật liệu
Thông số kỹ thuật
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/1551GN30 |
|---|---|---|---|
| UL flame retardant rating | 0.750mm | UL 94 | V-0 |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/1551GN30 |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 118 Mpa |
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
| bending strength | Yield | ASTM D790 | 157 Mpa |
| Elongation at Break | ASTM D638/ISO 527 | 5 % | |
| elongation | Break | ASTM D638 | 2.0 % |
| Bending modulus | ASTM D790 | 8340 Mpa |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/1551GN30 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 205 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 cm/cm/°C |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 220 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/1551GN30 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.7 % | |
| MD | ASTM D955 | 0.20-1.2 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.070 % |
| density | ASTM D792/ISO 1183 | 1.59 g/cm³ | |
| Water absorption rate | 23℃/24H | ASTM D570/ISO 62 | 0.07 % |
| melt mass-flow rate | 250°C/5.0kg | ASTM D1238 | 32 g/10min |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/1551GN30 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| Arc resistance | ASTM D495 | 110 sec | |
| Dielectric constant | ASTM D150 | 3.20 | |
| Dielectric strength | ASTM D149 | 20 KV/mm | |
| Dissipation factor | ASTM D150 | 0.016 |
