So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
ABS S160 Polymer Compounders Limited
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/ S160
Impact strength of cantilever beam gap23°CISO 180/1A32 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Charpy Notched Impact Strength23°CISO 179/1eA31 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/ S160
UL flame retardant rating1.5mmUL 94HB
0.8mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/ S160
bending strengthISO 17868.0 MPa
Tensile strainYield,80°CISO 527-22.4 %
BreakISO 527-218 %
Yield,-40°CISO 527-23.6 %
tensile strengthYield,80°CISO 527-218.0 MPa
YieldISO 527-2/5043.0 MPa
Tensile modulusISO 527-2/12200 MPa
Tensile strainYieldISO 527-2/502.6 %
tensile strengthYield,-40°CISO 527-263.0 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/ S160
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae85.0 °C
Vicat softening temperatureISO 306/B5094.0 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/Be89.0 °C
Linear coefficient of thermal expansionMDISO 11359-29.5E-04 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/ S160
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
Shrinkage rateISO 294-40.40to0.70 %
densityISO 11831.06 g/cm³
melt mass-flow rate220°C/10.0kgISO 11335.0 g/10min
Water absorption rateSaturation,23°CISO 621.0 %