So sánh vật liệu
Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
TPV 101-55 CELANESE USA
Santoprene™
Ứng dụng ô tô,Thiết bị tập thể dục,Trang chủ,Cơ hoành,Lĩnh vực ứng dụng hàng ti,Phụ kiện ống,Ứng dụng trong lĩnh vực ô,Bộ phận gia dụng,Các bộ phận dưới mui xe ô,Máy giặt,Đóng gói,Linh kiện điện
Chống lão hóa
Giá nội địa
Miền Nam Việt Nam (xung quanh Hồ Chí Minh)₫ 133.890/KG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Thông số kỹ thuật
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| 1.0mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB |
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| Permanent compression deformation | 125°C,70hr5 | ASTM D395B | 38 % |
| tear strength | 23°C4，横向Flow | ISO 34-1 | 16 kN/m |
| Permanent compression deformation | 125°C,70hr6 | ISO 815 | 38 % |
| 70°C,22hr6 | ISO 815 | 22 % | |
| Tensile stress | 100%Strain,23°C，横向Flow | ASTMD412 | 2.10 Mpa |
| tensile strength | Break,23°C，横向Flow | ASTMD412 | 5.20 Mpa |
| elongation | Break,23°C，Across Flow | ASTMD412 | 400 % |
| tear strength | 23°C3，横向Flow | ASTM D624 | 16.0 kN/m |
| Permanent compression deformation | 70°C,22hr5 | ASTM D395B | 22 % |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| RTI Elec | UL 746 | 90.0 °C | |
| RTI | 1.0mm | UL 746 | 90.0 °C |
| Brittle temperature | ASTMD746 | -60.0 °C | |
| RTI | 1.5mm | UL 746 | 90.0 °C |
| 3.0mm | UL 746 | 95.0 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| Resistance to cleaning agents | ISO 188 | f4 | |
| UL 749 | f3 |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| Hot wire ignition | 1.0mm | UL 746 | PLC 4 |
| High arc combustion index | HAI | UL 746 | PLC 0 |
| Dielectric constant | 23°C,1.93mm | ASTMD150 | 2.40 |
| Dielectric strength | 23°C,2.00mm | ASTM D149 | 27 KV/mm |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 0 |
| High voltage arc tracing rate | PLC | UL 746 | |
| HVTR | UL 746 | PLC 1 | |
| Hot wire ignition | 3.0mm | UL 746 | PLC 3 |
| 1.5mm | UL 746 | PLC 3 |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| Shore hardness | ShoreA,23°C | ISO 868 | 59 |
| aging | Điều kiện kiểm tra | Phương pháp kiểm tra | CELANESE USA/101-55 |
|---|---|---|---|
| Change rate of tensile strength in air | 23°C,168hr,在环己烷中 | ASTMD471 | 15 % |
| 23°C,168hr,在10％盐酸中 | ASTMD471 | -9.0 % | |
| Quality change rate | 23.0°C,166hr,在正己烷中 | ISO 1817 | -13 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在10％盐酸中 | ASTM D471 | 1.0 |
| Change rate of ultimate elongation in air | 23°C,168hr,在10％盐酸中 | ASTMD471 | 0.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在乙醚中 | ISO 1817 | -12 |
| Quality change rate | 125°C,166hr,在防冻剂中，50/50乙二醇（Prestone?）/水 | ISO 1817 | 6.8 % |
| 23.0°C,166hr,在乙醚中 | ISO 1817 | 13 % | |
| Change rate of tensile strength in air | 23°C,166hr,在甘油中 | ASTMD471 | -5.0 % |
| 125°C,166hr,在Pydraul?312中 | ASTMD471 | -19 % | |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在乙醚中 | ASTM D471 | -12 |
| Quality change rate | 23°C,168hr,在异丙醇中 | ASTM D471 | -19 % |
| 125°C,166hr,在Sunvis?706液体中 | ISO 1817 | 58 % | |
| Change rate of ultimate elongation in air | 23°C,166hr,在海水中 | ASTMD471 | 9.0 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在10％氯化锌中 | ASTM D471 | -2.0 |
| Quality change rate | 23.0°C,168hr,在环己烷中 | ISO 1817 | -3.7 % |
| 23°C,168hr,在50%氢氧化钠中 | ASTM D471 | -0.40 % | |
| Change rate of tensile strength in air | 23°C,168hr,在在三氯乙烯中 | ASTMD471 | 39 % |
| Quality change rate | 125°C,166hr,在动力转向液中 | ASTM D471 | 72 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在海水中 | ASTM D471 | -1.0 |
| Quality change rate | 23.0°C,168hr,在甲乙酮中 | ISO 1817 | -31 % |
| Change rate of ultimate elongation in air | 125°C,70hr,在IRM903油中 | ASTMD471 | -48 % |
| 125°C,166hr,在Sunvis?706液体中 | ASTMD471 | -35 % | |
| 23°C,166hr,在二甲基甲酰胺中 | ASTMD471 | 3.0 % | |
| Change rate of tensile strength in air | 23°C,166hr,在松节油中 | ASTMD471 | -27 % |
| Quality change rate | 23.0°C,166hr,在邻苯二甲酸二辛酯中 | ISO 1817 | -9.0 % |
| 125°C,1000hr,在防冻剂中，50/50V/V/水 | ISO 1817 | 13 % | |
| 23.0°C,168hr,在2.5％洗涤剂中（汰渍） | ISO 1817 | 0.90 % | |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,70hr,在IRM903油中 | ASTM D471 | -23 |
| 支撐A,125°C,1000hr,在防冻剂中，50/50V/V/水 | ASTM D471 | -4.0 | |
| Change rate of ultimate elongation in air | 23°C,168hr,在在三氯乙烯中 | ASTMD471 | 36 % |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,166hr,在防冻剂中，50/50乙二醇（Prestone?）/水 | ASTM D471 | -6.0 |
| Change rate of ultimate elongation in air | 23°C,168hr,在98％硫酸中 | ASTMD471 | -18 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,168hr,在在三氯乙烯中 | ISO 1817 | -1.0 |
| ShoreA,125°C,1000hr,在防冻剂中，50/50V/V/水 | ISO 1817 | -4.0 | |
| Quality change rate | 125°C,166hr,在Pydraul?312中 | ASTM D471 | 18 % |
| Change rate of hardness (Shore) in the air | ShoreA,100°C,168hr,在去离子水中 | ISO 1817 | -2.0 |
| Change rate of ultimate elongation in air | 23°C,166hr,在松节油中 | ASTMD471 | -32 % |
| Change rate of tensile strength in air | 125°C,166hr,在动力转向液中 | ASTMD471 | -33 % |
| Quality change rate | 23.0°C,168hr,在50%氢氧化钠中 | ISO 1817 | -0.40 % |
| Change rate of tensile strength in air | 23°C,168hr,在15％氯化钠中 | ASTMD471 | -10 % |
| 125°C,168hr,在ASTM#1油中 | ASTMD471 | -29 % | |
| Quality change rate | 125°C,166hr,在动力转向液中 | ISO 1817 | 72 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在95％乙醇中 | ASTMD471 | 3.0 % |
| Quality change rate | 125°C,1000hr,在防冻剂中，50/50V/V/水 | ASTM D471 | 13 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在2.5％洗涤剂中（汰渍） | ASTMD471 | -15 % |
| 125°C,166hr,在Ucon?CC732中 | ASTMD471 | -9.0 % | |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在10%氯化锌中 | ISO 1817 | -2.0 |
| Quality change rate | 125°C,166hr,在Ucon?50HB5100中 | ASTM D471 | -19 % |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,166hr,在防冻剂中，50/50乙二醇(Prestone?)/水 | ISO 1817 | -6.0 |
| Change rate of ultimate elongation in air | 23°C,166hr,在1－丙醇中 | ASTMD471 | 24 % |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,166hr,在动力转向液中 | ISO 1817 | -20 |
| Quality change rate | 125°C,166hr,在Pydraul?312中 | ISO 1817 | 18 % |
| Change rate of ultimate elongation in air | 100°C,166hr,在锂基润滑脂中 | ASTMD471 | -26 % |
| Quality change rate | 23°C,166hr,在10％氯化锌中 | ASTM D471 | 0.40 % |
| 5°C,166hr,在氟里昂?11中 | ASTM D471 | 140 % | |
| Continuous use temperature | 1008hr | 自定标准 | 135 °C |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在异丙醇中 | ASTM D471 | 4.0 |
| Change rate of tensile strength in air | 100°C,166hr,在ASTM#1油中 | ASTMD471 | -13 % |
| Change rate of ultimate elongation in air | 23°C,166hr,在乙醚中 | ASTMD471 | -3.0 % |
| Quality change rate | 125°C,166hr,在自动传动液中 | ISO 1817 | 62 % |
| Change rate of tensile strength in air | 125°C,70hr,在IRM903油中 | ASTMD471 | -8.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在基准燃料C中（异辛烷/甲苯，50/50） | ISO 1817 | -17 |
| ShoreA,125°C,166hr,在自动传动液中 | ISO 1817 | -18 | |
| Quality change rate | 23°C,166hr,在溴代苯中 | ASTM D471 | 120 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在基准燃料A中 | ASTM D471 | -13 |
| Quality change rate | 23.0°C,166hr,在锂基润滑脂中 | ISO 1817 | 12 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在邻苯二甲酸二辛酯中 | ISO 1817 | -1.0 |
| Change rate of tensile strength in air | 125°C,166hr,在自动传动液中 | ASTMD471 | -46 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,168hr,在2.5%洗涤剂中（汰渍） | ISO 1817 | 1.0 |
| Quality change rate | 23.0°C,166hr,在海水中 | ISO 1817 | 0.50 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在醋酸中 | ASTMD471 | -8.0 % |
| Quality change rate | 23°C,166hr,在液压刹车液中 | ASTM D471 | 0.20 % |
| Change rate of tensile strength in air | 23°C,168hr,在甲乙酮中 | ASTMD471 | 31 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,168hr,在98%硫酸中 | ISO 1817 | 0.0 |
| Quality change rate | 125°C,168hr,在IRM903油中 | ISO 1817 | 99 % |
| Change rate of tensile strength in air | 23°C,166hr,在基准燃料C中 | ASTMD471 | -25 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在甲乙酮中 | ASTMD471 | 51 % |
| Change rate of hardness (Shore) in the air | ShoreA,100°C,166hr,在ASTM#1油中 | ISO 1817 | -12 |
| Change rate of tensile strength in air | 23°C,168hr,在醋酸中 | ASTMD471 | -13 % |
| Quality change rate | 125°C,168hr,在ASTM#1油中 | ASTM D471 | 54 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在1-丙醇中 | ISO 1817 | 2.0 |
| ShoreA,23°C,168hr,在醋酸中 | ISO 1817 | -2.0 | |
| Quality change rate | 23.0°C,166hr,在二甲基甲酰胺中 | ISO 1817 | 4.5 % |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,166hr,在Pydraul?312中 | ISO 1817 | -8.0 |
| Change rate of ultimate elongation in air | 125°C,168hr,在IRM903油中 | ASTMD471 | -56 % |
| Change rate of tensile strength in air | 23°C,166hr,在10％氯化锌中 | ASTMD471 | 2.0 % |
| Quality change rate | 23.0°C,168hr,在10％盐酸中 | ISO 1817 | -0.40 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在二甲基甲酰胺中 | ISO 1817 | -8.0 |
| Change rate of tensile strength in air | 23°C,166hr,在二甲基甲酰胺中 | ASTMD471 | -4.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,5°C,166hr,在Freon?11中 | ISO 1817 | -15 |
| Change rate of ultimate elongation in air | 125°C,166hr,在Ucon?50HB5100中 | ASTMD471 | 9.0 % |
| 23°C,168hr,在50%氢氧化钠中 | ASTMD471 | 0.0 % | |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,166hr,在Ucon?CC732中 | ASTM D471 | -8.0 |
| Quality change rate | 23.0°C,168hr,在98％硫酸中 | ISO 1817 | 4.5 % |
| Change rate of hardness (Shore) in the air | 支撐A,100°C,168hr,在IRM903油中 | ASTM D471 | -22 |
| ShoreA,23°C,168hr,在甲乙酮中 | ISO 1817 | 9.0 | |
| Change rate of ultimate elongation in air | 23°C,166hr,在甘油中 | ASTMD471 | 0.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在正己烷中 | ISO 1817 | -9.0 |
| Quality change rate | 23°C,166hr,在邻苯二甲酸二辛酯中 | ASTM D471 | -9.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,70hr,在IRM903油中 | ISO 1817 | -23 |
| Quality change rate | 23°C,166hr,在乙醚中 | ASTM D471 | 13 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在98％硫酸中 | ASTM D471 | 0.0 |
| 支撐A,23°C,166hr,在甘油中 | ASTM D471 | -4.0 | |
| Quality change rate | 23.0°C,168hr,在在三氯乙烯中 | ISO 1817 | -14 % |
| Change rate of tensile strength in air | 23°C,168hr,在95％乙醇中 | ASTMD471 | -7.0 % |
| 23°C,166hr,在邻苯二甲酸二辛酯中 | ASTMD471 | 11 % | |
| Quality change rate | 125°C,166hr,在Sunvis?706液体中 | ASTM D471 | 58 % |
| 23.0°C,166hr,在溴代苯中 | ISO 1817 | 120 % | |
| Change rate of ultimate elongation in air | 23°C,166hr,在正己烷中 | ASTMD471 | 27 % |
| 23°C,166hr,在10％氯化锌中 | ASTMD471 | 9.0 % | |
| 150°C,168hr | ASTMD573 | 13 % | |
| Change rate of hardness (Shore) in the air | 支撐A,100°C,168hr,在去离子水中 | ASTM D471 | -2.0 |
| Change rate of tensile strength in air | 23°C,166hr,在溴代苯中 | ASTMD471 | -30 % |
| Change rate of ultimate elongation in air | 125°C,166hr,在防冻剂中，50/50乙二醇（Prestone?）/水 | ASTMD471 | -6.0 % |
| Quality change rate | 23.0°C,166hr,在甘油中 | ISO 1817 | 1.3 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在溴代苯中 | ISO 1817 | -15 |
| ShoreA,23°C,166hr,在松节油中 | ISO 1817 | -16 | |
| 支撐A,23°C,168hr,在在三氯乙烯中 | ASTM D471 | -1.0 | |
| Change rate of tensile strength in air | 23°C,166hr,在液压刹车液中 | ASTMD471 | -6.0 % |
| Quality change rate | 23°C,166hr,在锂基润滑脂中 | ASTM D471 | 12 % |
| Change rate of tensile strength in air | 23°C,166hr,在正己烷中 | ASTMD471 | 14 % |
| Change rate of ultimate elongation in air | 125°C,1000hr,在防冻剂中，50/50V/V/水 | ASTMD471 | -21 % |
| 23°C,166hr,在锂基润滑脂中 | ASTMD471 | -9.0 % | |
| Quality change rate | 23°C,166hr,在甘油中 | ASTM D471 | 1.3 % |
| 23.0°C,166hr,在松节油中 | ISO 1817 | 84 % | |
| Change rate of tensile strength in air | 23°C,166hr,在海水中 | ASTMD471 | 3.0 % |
| Change rate of ultimate elongation in air | 23°C,166hr,在溴代苯中 | ASTMD471 | -35 % |
| 100°C,166hr,在ASTM#1油中 | ASTMD471 | -18 % | |
| Change rate of hardness (Shore) in the air | 支撐A,5°C,166hr,在氟里昂?11中 | ASTM D471 | -15 |
| Quality change rate | 100°C,168hr,在IRM903油中 | ASTM D471 | 92 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在海水中 | ISO 1817 | -1.0 |
| 支撐A,23°C,166hr,在邻苯二甲酸二辛酯中 | ASTM D471 | -1.0 | |
| ShoreA,23°C,168hr,在15%氯化钠中 | ISO 1817 | 2.0 | |
| Change rate of tensile strength in air | 125°C,166hr,在Sunvis?706液体中 | ASTMD471 | -30 % |
| 23°C,168hr,在异丙醇中 | ASTMD471 | 12 % | |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在松节油中 | ASTM D471 | -16 |
| Quality change rate | 23°C,168hr,在甲乙酮中 | ASTM D471 | -31 % |
| 125°C,168hr,在ASTM#1油中 | ISO 1817 | 54 % | |
| Change rate of ultimate elongation in air | 125°C,166hr,在动力转向液中 | ASTMD471 | -41 % |
| Quality change rate | 23°C,168hr,在醋酸中 | ASTM D471 | 7.0 % |
| Change rate of ultimate elongation in air | 125°C,168hr,在ASTM#1油中 | ASTMD471 | -43 % |
| Quality change rate | 125°C,168hr,在IRM903油中 | ASTM D471 | 99 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在液压刹车液中 | ISO 1817 | -3.0 |
| Quality change rate | 100°C,166hr,在ASTM#1油中 | ISO 1817 | 35 % |
| 23.0°C,168hr,在异丙醇中 | ISO 1817 | -19 % | |
| 23°C,168hr,在10％盐酸中 | ASTM D471 | -0.40 % | |
| 23°C,168hr,在环己烷中 | ASTM D471 | -3.7 % | |
| 23°C,168hr,在2.5％洗涤剂中（汰渍） | ASTM D471 | 0.90 % | |
| 23.0°C,168hr,在95％乙醇中 | ISO 1817 | 0.40 % | |
| Change rate of tensile strength in air | 23°C,166hr,在乙醚中 | ASTMD471 | 3.0 % |
| 100°C,168hr,在IRM903油中 | ASTMD471 | -40 % | |
| Change rate of ultimate elongation in air | 23°C,166hr,在液压刹车液中 | ASTMD471 | 3.0 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在1－丙醇中 | ASTM D471 | 2.0 |
| ShoreA,125°C,168hr,在IRM903油中 | ISO 1817 | -27 | |
| 支撐A,125°C,166hr,在Sunvis?706液体中 | ASTM D471 | -15 | |
| ShoreA,100°C,168hr,在IRM903油中 | ISO 1817 | -22 | |
| Quality change rate | 23.0°C,166hr,在基准燃料C中 | ISO 1817 | 69 % |
| 23°C,166hr,在松节油中 | ASTM D471 | 84 % | |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在15％氯化钠中 | ASTM D471 | 2.0 |
| Quality change rate | 23°C,166hr,在吡啶中 | ASTM D471 | -16 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在环己烷中 | ASTM D471 | -16 |
| ShoreA,23°C,168hr,在95%乙醇中 | ISO 1817 | 0.0 | |
| Quality change rate | 5.00°C,166hr,在氟里昂?11中 | ISO 1817 | 140 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在正己烷中 | ASTM D471 | -9.0 |
| Change rate of tensile strength in air | 150°C,168hr | ASTMD573 | -7.0 % |
| Quality change rate | 100°C,166hr,在锂基润滑脂中 | ASTM D471 | 43 % |
| 23°C,166hr,在海水中 | ASTM D471 | 0.50 % | |
| 125°C,166hr,在Ucon?CC732中 | ASTM D471 | 11 % | |
| Change rate of tensile strength in air | 125°C,168hr,在IRM903油中 | ASTMD471 | -43 % |
| Quality change rate | 23°C,168hr,在在三氯乙烯中 | ASTM D471 | -14 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,168hr,在10%盐酸中 | ISO 1817 | 1.0 |
| 支撐A,23°C,166hr,在二甲基甲酰胺中 | ASTM D471 | -8.0 | |
| 支撐A,23°C,168hr,在甲乙酮中 | ASTM D471 | 9.0 | |
| Change rate of tensile strength in air | 23°C,168hr,在2.5％洗涤剂中（汰渍） | ASTMD471 | -19 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在甘油中 | ISO 1817 | -4.0 |
| Quality change rate | 23°C,168hr,在98％硫酸中 | ASTM D471 | 4.5 % |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,168hr,在ASTM#1油中 | ASTM D471 | -17 |
| Quality change rate | 100°C,168hr,在去离子水中 | ASTM D471 | 6.6 % |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,168hr,在IRM903油中 | ASTM D471 | -27 |
| ShoreA,125°C,166hr,在Ucon?CC732中 | ISO 1817 | -8.0 | |
| 支撐A,100°C,166hr,在锂基润滑脂中 | ASTM D471 | -14 | |
| Quality change rate | 23.0°C,166hr,在10％氯化锌中 | ISO 1817 | 0.40 % |
| 23°C,166hr,在正己烷中 | ASTM D471 | -13 % | |
| Change rate of tensile strength in air | 125°C,166hr,在Ucon?50HB5100中 | ASTMD471 | -2.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在锂基润滑脂中 | ISO 1817 | -7.0 |
| Quality change rate | 125°C,166hr,在Ucon?50HB5100中 | ISO 1817 | -19 % |
| Change rate of tensile strength in air | 23°C,166hr,在参考燃料A中（异辛烷） | ISO 1817 | -9.0 % |
| Quality change rate | 23°C,168hr,在95％乙醇中 | ASTM D471 | 0.40 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在异丙醇中 | ASTMD471 | 28 % |
| Quality change rate | 23°C,166hr,在丙烯酸正丁酯中 | ASTM D471 | -12 % |
| Change rate of tensile strength in air | 125°C,166hr,在Ucon?CC732中 | ASTMD471 | -14 % |
| Change rate of hardness (Shore) in the air | 支撐A,100°C,166hr,在ASTM#1油中 | ASTM D471 | -12 |
| 支撐A,23°C,166hr,在丙烯酸正丁酯中 | ASTM D471 | -1.0 | |
| Volume change | 125°C,70hr,在IRM903油中 | ASTMD471 | 97 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在锂基润滑脂中 | ASTM D471 | -7.0 |
| Change rate of tensile strength in air | 23°C,166hr,在锂基润滑脂中 | ASTMD471 | -9.0 % |
| Quality change rate | 125°C,166hr,在防冻剂中，50/50乙二醇（Prestone?）/水 | ASTM D471 | 6.8 % |
| 23°C,166hr,在二甲基甲酰胺中 | ASTM D471 | 4.5 % | |
| Change rate of ultimate elongation in air | 23°C,166hr,在邻苯二甲酸二辛酯中 | ASTMD471 | 21 % |
| Quality change rate | 23.0°C,166hr,在基准燃料A中 | ISO 1817 | 37 % |
| Change rate of ultimate elongation in air | 125°C,166hr,在自动传动液中 | ASTMD471 | -53 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,168hr,在异丙醇中 | ISO 1817 | 4.0 |
| ShoreA,23°C,168hr,在环己烷中 | ISO 1817 | -16 | |
| Change rate of tensile strength in air | 5°C,166hr,在氟里昂?11中 | ASTMD471 | 0.0 % |
| Change rate of ultimate elongation in air | 23°C,166hr,在吡啶中 | ASTMD471 | 21 % |
| Change rate of tensile strength in air | 100°C,166hr,在锂基润滑脂中 | ASTMD471 | -25 % |
| Quality change rate | 23.0°C,166hr,在液压刹车液中 | ISO 1817 | 0.20 % |
| Change rate of tensile strength in air | 23°C,166hr,在1－丙醇中 | ASTMD471 | 8.0 % |
| Change rate of ultimate elongation in air | 23°C,168hr,在15％氯化钠中 | ASTMD471 | -5.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,150°C,168hr | ASTMD573 | 3.0 |
| 支撐A,125°C,166hr,在动力转向液中 | ASTM D471 | -20 | |
| 支撐A,23°C,168hr,在2.5％洗涤剂中（汰渍） | ASTM D471 | 1.0 | |
| Quality change rate | 23°C,166hr,在参考燃料A中（异辛烷） | ASTM D471 | 37 % |
| 100°C,166hr,在锂基润滑脂中 | ISO 1817 | 43 % | |
| Change rate of hardness (Shore) in the air | ShoreA,100°C,166hr,在锂基润滑脂中 | ISO 1817 | -14 |
| Quality change rate | 100°C,168hr,在IRM903油中 | ISO 1817 | 92 % |
| 23.0°C,168hr,在醋酸中 | ISO 1817 | 7.0 % | |
| Change rate of ultimate elongation in air | 5°C,166hr,在氟里昂?11中 | ASTMD471 | -15 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在吡啶中 | ASTM D471 | 2.0 |
| 支撐A,23°C,168hr,在醋酸中 | ASTM D471 | -2.0 | |
| Change rate of tensile strength in air | 125°C,1000hr,在防冻剂中，50/50V/V/水 | ASTMD471 | -7.0 % |
| Change rate of ultimate elongation in air | 100°C,168hr,在IRM903油中 | ASTMD471 | -56 % |
| 23°C,166hr,在参考燃料A中（异辛烷） | ISO 1817 | -15 % | |
| 23°C,166hr,在丙烯酸正丁酯中 | ASTMD471 | 27 % | |
| 23°C,168hr,在环己烷中 | ASTMD471 | 28 % | |
| Quality change rate | 23.0°C,166hr,在丙烯酸正丁酯中 | ISO 1817 | -12 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在基准燃料A中（异辛烷） | ISO 1817 | -13 |
| Change rate of ultimate elongation in air | 23°C,166hr,在基准燃料C中 | ASTMD471 | -32 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在基准燃料C中 | ASTM D471 | -17 |
| Change rate of tensile strength in air | 125°C,166hr,在防冻剂中，50/50乙二醇（Prestone?）/水 | ASTMD471 | -8.0 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,168hr,在50%氢氧化钠中 | ASTM D471 | 1.0 |
| Quality change rate | 100°C,168hr,在去离子水中 | ISO 1817 | 6.6 % |
| Change rate of ultimate elongation in air | 23°C,166hr,在基准燃料A中 | ASTM D471 | -15 % |
| Quality change rate | 23.0°C,166hr,在吡啶中 | ISO 1817 | -16 % |
| 23°C,166hr,在1－丙醇中 | ASTM D471 | -16 % | |
| 100°C,166hr,在ASTM#1油中 | ASTM D471 | 35 % | |
| Change rate of ultimate elongation in air | 100°C,168hr,在去离子水中 | ASTMD471 | -10 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在丙烯酸正丁酯中 | ISO 1817 | -1.0 |
| Quality change rate | 23°C,168hr,在15％氯化钠中 | ASTM D471 | 0.20 % |
| Change rate of tensile strength in air | 23°C,166hr,在基准燃料A中 | ASTM D471 | -9.0 % |
| Change rate of hardness (Shore) in the air | ShoreA,23°C,166hr,在吡啶中 | ISO 1817 | 2.0 |
| Change rate of tensile strength in air | 23°C,166hr,在丙烯酸正丁酯中 | ASTMD471 | 16 % |
| Change rate of ultimate elongation in air | 125°C,166hr,在Pydraul?312中 | ASTMD471 | -15 % |
| Change rate of hardness (Shore) in the air | 支撐A,125°C,166hr,在Pydraul?312中 | ASTM D471 | -8.0 |
| 支撐A,23°C,168hr,在95％乙醇中 | ASTM D471 | 0.0 | |
| ShoreA,23°C,168hr,在50%氢氧化钠中 | ISO 1817 | 1.0 | |
| 支撐A,125°C,166hr,在自动传动液中 | ASTM D471 | -18 | |
| 支撐A,125°C,166hr,在Ucon?50HB5100中 | ASTM D471 | 2.0 | |
| Quality change rate | 23.0°C,168hr,在15％氯化钠中 | ISO 1817 | 0.20 % |
| Change rate of tensile strength in air | 23°C,166hr,在吡啶中 | ASTMD471 | 2.0 % |
| Quality change rate | 125°C,166hr,在Ucon?CC732中 | ISO 1817 | 11 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在溴代苯中 | ASTM D471 | -15 |
| Quality change rate | 125°C,166hr,在自动传动液中 | ASTM D471 | 62 % |
| Change rate of tensile strength in air | 100°C,168hr,在去离子水中 | ASTMD471 | -11 % |
| 23°C,168hr,在98％硫酸中 | ASTMD471 | -5.0 % | |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,166hr,在Ucon?50HB5100中 | ISO 1817 | 2.0 |
| Quality change rate | 23°C,166hr,在基准燃料C中 | ASTM D471 | 69 % |
| Change rate of hardness (Shore) in the air | ShoreA,125°C,166hr,在Sunvis?706液体中 | ISO 1817 | -15 |
| Change rate of tensile strength in air | 23°C,168hr,在50%氢氧化钠中 | ASTMD471 | -9.0 % |
| Change rate of hardness (Shore) in the air | 支撐A,23°C,166hr,在液压刹车液中 | ASTM D471 | -3.0 |
| ShoreA,125°C,168hr,在ASTM#1油中 | ISO 1817 | -17 | |
| Quality change rate | 23.0°C,166hr,在1－丙醇中 | ISO 1817 | -16 % |