So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
ASA S9500-10 Polymer Compounders Limited
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/S9500-10
Impact strength of cantilever beam gap23°CISO 180/1A16 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA22 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU150 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/S9500-10
UL flame retardant rating0.8mmUL 94HB
1.5mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/S9500-10
bending strengthISO 17858.0 MPa
Tensile strainYield,80°CISO 527-22.4 %
BreakISO 527-240 %
tensile strengthYield,80°CISO 527-219.0 MPa
Tensile strainYield,-40°CISO 527-23.6 %
tensile strengthYieldISO 527-2/5035.0 MPa
Tensile modulusISO 527-2/12000 MPa
tensile strengthYield,-40°CISO 527-263.0 MPa
Tensile strainYieldISO 527-2/503.6 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/S9500-10
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae79.0 °C
Vicat softening temperatureISO 306/B5090.0 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/Be90.0 °C
Linear coefficient of thermal expansionMDISO 11359-29E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/S9500-10
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
Shrinkage rateISO 294-40.40to0.70 %
densityISO 11831.05 g/cm³
melt mass-flow rate220°C/10.0kgISO 113322 g/10min
Water absorption rateSaturation,23°CISO 621.0 %