PA6 Amilan® CM1011G-30 TORAY JAPAN
- Đặc tính:Đặc tính: Kính được gia cĐúc caoTác động caoĐặc tính: Kính được gia cĐúc caoTác động cao
- Lĩnh vực ứng dụng:Lĩnh vực ô tôNhà ở
- Giấy chứng nhận:UL
So sánh
Xem giáBảng thông số kỹ thuật
| Other performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| filler content | filler content | 无水｜45 wt% | |
| filler content | filler content | 1.9%水｜- wt% |
| Basic Performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Water absorption rate | Water absorption rate 23℃，24hr | ASTM D-570 | 无水｜0.9 % |
| Water absorption rate | Water absorption rate 23℃，24hr | ASTM D-570 | 1.9%水｜- % |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，Unnotched1/8 | ASTM D-256 | 1.9%水｜120 kg·cm/cm |
| Bending modulus | Bending modulus 23℃ | ASTM D-790 | 无水｜122000 kg/cm2 |
| Bending modulus | Bending modulus 23℃ | ASTM D-790 | 1.9%水｜72000 kg/cm2 |
| Bending modulus | Bending modulus 80℃ | ASTM D-790 | 无水｜63000 kg/cm2 |
| Bending modulus | Bending modulus 80℃ | ASTM D-790 | 1.9%水｜45000 kg/cm2 |
| Bending modulus | Bending modulus -40℃ | ASTM D-790 | 无水｜140000 kg/cm2 |
| Bending modulus | Bending modulus -40℃ | ASTM D-790 | 1.9%水｜120000 kg/cm2 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 无水｜95 M-标度 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 1.9%水｜- M-标度 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 无水｜121 R-标度 |
| Elongation at Break | Elongation at Break 23℃ | ASTM D-638 | 无水｜5 % |
| Elongation at Break | Elongation at Break 23℃ | ASTM D-638 | 1.9%水｜5 % |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/8 | ASTM D-256 | 无水｜12.5 kg·cm/cm |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/8 | ASTM D-256 | 1.9%水｜15 kg·cm/cm |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/8 | ASTM D-256 | 无水｜12.5 kg·cm/cm2 |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/8 | ASTM D-256 | 1.9%水｜15 kg·cm/cm2 |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，VNotched1/2 | ASTM D-256 | 无水｜15 kg·cm/cm |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，VNotched1/2 | ASTM D-256 | 1.9%水｜20 kg·cm/cm |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，Unnotched1/8 | ASTM D-256 | 无水｜98 kg·cm/cm |
| Shear strength | Shear strength 23℃ | ASTM D-732 | 无水｜940 kg/cm2 |
| Shear strength | Shear strength 23℃ | ASTM D-732 | 1.9%水｜750 kg/cm2 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 1.9%水｜- R-标度 |
| bending strength | bending strength 23℃ | ASTM D-790 | 无水｜2900 kg/cm2 |
| bending strength | bending strength 23℃ | ASTM D-790 | 1.9%水｜1850 kg/cm2 |
| bending strength | bending strength 80℃ | ASTM D-790 | 无水｜16000 kg/cm2 |
| bending strength | bending strength 80℃ | ASTM D-790 | 1.9%水｜- kg/cm2 |
| bending strength | bending strength -40℃ | ASTM D-790 | 无水｜3300 kg/cm2 |
| bending strength | bending strength -40℃ | ASTM D-790 | 1.9%水｜- kg/cm2 |
| tensile strength | tensile strength 23℃，Yield | ASTM D-638 | 无水｜2000 kg/cm2 |
| tensile strength | tensile strength 23℃，Yield | ASTM D-638 | 1.9%水｜1300 kg/cm2 |
| tensile strength | tensile strength 80℃，Yield | ASTM D-638 | 无水｜1200 kg/cm2 |
| tensile strength | tensile strength 80℃，Yield | ASTM D-638 | 1.9%水｜- kg/cm2 |
| tensile strength | tensile strength -40℃，Yield | ASTM D-638 | 无水｜2900 kg/cm2 |
| tensile strength | tensile strength -40℃，Yield | ASTM D-638 | 1.9%水｜- kg/cm2 |
| compressive strength | compressive strength 23℃ | ASTM D-695 | 无水｜1900 kg/cm2 |
| compressive strength | compressive strength 23℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| compressive strength | compressive strength 80℃ | ASTM D-695 | 无水｜1000 kg/cm2 |
| compressive strength | compressive strength 80℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| compressive strength | compressive strength -40℃ | ASTM D-695 | 无水｜2600 kg/cm2 |
| compressive strength | compressive strength -40℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL-94 flame retardant grade | UL-94 flame retardant grade 1/32" | UL 94 | 无水｜HB |
| UL-94 flame retardant grade | UL-94 flame retardant grade 1/32" | UL 94 | 1.9%水｜- |
| Hot deformation temperature | Hot deformation temperature 4.6kg/cm2 | ASTM D-648 | 无水｜225 °C |
| Hot deformation temperature | Hot deformation temperature 4.6kg/cm2 | ASTM D-648 | 1.9%水｜- °C |
| Melting temperature | Melting temperature | 差示扫描测热计DSC | 225 °C |
| specific heat | specific heat | 无水｜0.31 Cal/g·℃ | |
| specific heat | specific heat | 1.9%水｜- Cal/g·℃ | |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D-696 | 无水｜2-3 ×10-5cm/cm/℃ |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D-696 | 1.9%水｜- ×10-5cm/cm/℃ |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| density | density | ASTM D-792 | 无水｜1.5 |
| density | density | ASTM D-792 | 1.9%水｜- |
| Taber abraser | Taber abraser 1000g,CS-17 | ASTM D-1044 | 无水｜30 mg/1000次 |
| Taber abraser | Taber abraser 1000g,CS-17 | ASTM D-1044 | 1.9%水｜- mg/1000次 |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Dissipation factor | Dissipation factor 106Hz | ASTM D-150 | 无水｜0.02 |
| Dissipation factor | Dissipation factor 106Hz | ASTM D-150 | 1.9%水｜0.06 |
| Dielectric strength | Dielectric strength 1/8" | ASTM D-149 | 无水｜19 KV/mm |
| Dielectric strength | Dielectric strength 1/8" | ASTM D-149 | 1.9%水｜15 KV/mm |
| Dielectric constant | Dielectric constant 106Hz | ASTM D-150 | 无水｜4.2 |
| Dielectric constant | Dielectric constant 106Hz | ASTM D-150 | 1.9%水｜4.5 |
| Dielectric constant | Dielectric constant 103Hz | ASTM D-150 | 无水｜4.9 |
| Dielectric constant | Dielectric constant 103Hz | ASTM D-150 | 1.9%水｜7.4 |
| Volume resistivity | Volume resistivity | ASTM D-257 | 无水｜1015 Ω.cm |
| Volume resistivity | Volume resistivity | ASTM D-257 | 1.9%水｜1012 Ω.cm |
| Dissipation factor | Dissipation factor 50Hz | ASTM D-150 | 无水｜0.03 |
| Dissipation factor | Dissipation factor 50Hz | ASTM D-150 | 1.9%水｜0.16 |
| Arc resistance | Arc resistance 1/8" | ASTM D-495 | 无水｜104 S |
| Arc resistance | Arc resistance 1/8" | ASTM D-495 | 1.9%水｜119 S |
