impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	ASTM D256	690 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	ASTM D256	NoBreak
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	ASTM D1822	399 kJ/m²

impact performance

Test Condition

Test Method

Test Result

Impact strength of cantilever beam gap

ASTM D256

690 J/m

Impact strength of cantilever beam gap

ASTM D256

NoBreak

Impact strength of cantilever beam gap

ASTM D1822

399 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	UL flame retardant rating 0.75mm	UL 94	V-0
Extreme Oxygen Index	Extreme Oxygen Index	ASTM D2863	38 %

flammability

Test Condition

Test Method

Test Result

UL flame retardant rating

0.75mm

UL 94

V-0

Extreme Oxygen Index

ASTM D2863

38 %

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus	Tensile modulus	ASTM D638	2340 Mpa
tensile strength	tensile strength Yield	ASTM D638	69.6 Mpa
tensile strength	tensile strength	tensile strength Break	ASTM D638	69.6 Mpa
elongation	elongation Yield	ASTM D638	7.2 %
elongation	elongation	elongation Break	ASTM D638	60 %
Bending modulus	Bending modulus	ASTM D790	2410 Mpa
bending strength	bending strength Yield	ASTM D790	91.0 Mpa
Compressive modulus	Compressive modulus	ASTM D695	1730 Mpa
compressive strength	compressive strength	ASTM D695	98.9 Mpa
shear strength	shear strength	ASTM D732	62.7 Mpa
Poisson's ratio	Poisson's ratio	ASTME132	0.42

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	Hot deformation temperature 0.45MPa,Unannealed	ASTM D648	214 °C
Hot deformation temperature	Hot deformation temperature	Hot deformation temperature 1.8MPa,Unannealed	ASTM D648	207 °C
Glass transition temperature	Glass transition temperature	ASTME1356	220 °C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion MD	ASTM D696	5.6E-05 cm/cm/°C
thermal conductivity	thermal conductivity	ASTMC177	0.35 W/m/K

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	melt mass-flow rate	ASTM D1238	14to20 g/10min
Shrinkage rate	Shrinkage rate MD	ASTM D955	0.70 %
Water absorption rate	Water absorption rate 24hr	ASTM D570	0.37 %
density	density	ASTM D792	1.30 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity	Volume resistivity	ASTM D257	9E+15 ohms·cm
Dielectric strength	Dielectric strength	ASTM D149	14 KV/mm
Dielectric constant	Dielectric constant 60Hz	ASTM D150	3.44
Dielectric constant	Dielectric constant	Dielectric constant 1kHz	ASTM D150	3.40

IMPORTANT NOTES: vnplas.com collected the data in the data sheet from the material manufacturers. vnplas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.