Material Properties:Tăng cường｜Gia cố sợi thủy tinh｜Chống thủy phân
Typical Applications:Thiết bị cỏ｜Thiết bị sân vườn｜Thực phẩm không cụ thể｜Ứng dụng ngoài trời｜Lĩnh vực điện｜Lĩnh vực điện tử｜Lĩnh vực ứng dụng xây dựn｜Xử lý chất lỏng｜Thiết bị điện｜Phụ tùng mui xe｜Sản phẩm y tế｜Sản phẩm chăm sóc｜Túi nhựa｜Phụ tùng ô tô bên ngoài｜Ứng dụng chiếu sáng
Color:--
Grade:Cấp độ dòng chảy cao

Technical Data Sheet Compare

impact performance	Test Condition	Test Method	Test Result
Dart impact	Dart impact 23°C, Total Energy	ASTM D3763	20.0 J
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength 23°C	ASTM D4812	590 J/m
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength 23°C8	ISO 180/1U	30 kJ/m²

impact performance

Test Condition

Test Method

Test Result

Dart impact

23°C, Total Energy

ASTM D3763

20.0 J

Suspended wall beam without notch impact strength

23°C

ASTM D4812

590 J/m

Suspended wall beam without notch impact strength

23°C8

ISO 180/1U

30 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	tensile strength Break	ISO 527-2/50	110 Mpa
tensile strength	tensile strength	tensile strength Break3	ASTM D638	130 Mpa
Tensile modulus	Tensile modulus --	ISO 527-2/1	8200 Mpa
Tensile modulus	Tensile modulus	Tensile modulus --2	ASTM D638	8600 Mpa
elongation	elongation Break3	ASTM D638	3.0 %
elongation	elongation	elongation Break	ISO 527-2/50	2.5 %
Bending modulus	Bending modulus 50.0 mm Span4	ASTM D790	7200 Mpa
Bending modulus	Bending modulus	Bending modulus --5	ISO 178	6800 Mpa
bending strength	bending strength --5,6	ISO 178	160 Mpa
bending strength	bending strength	bending strength Yield, 50.0 mm Span4	ASTM D790	160 Mpa

injection	Test Condition	Test Result
Temperature at the rear of the barrel	Temperature at the rear of the barrel	265 to 315 °C
Suggested injection volume	Suggested injection volume	30 to 70 %
Suggested maximum moisture content	Suggested maximum moisture content	0.020 %
drying time	drying time	3.0 to 4.0 hr
drying temperature	drying temperature	110 to 120 °C
Temperature in the middle of the barrel	Temperature in the middle of the barrel	275 to 320 °C
Temperature at the front of the material cylinder	Temperature at the front of the material cylinder	290 to 325 °C
Spray nozzle temperature	Spray nozzle temperature	300 to 325 °C
Processing (melt) temperature	Processing (melt) temperature	300 to 325 °C
Mold temperature	Mold temperature	80 to 110 °C
Back pressure	Back pressure	0.300 to 0.700 Mpa
Screw speed	Screw speed	20 to 100 rpm

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Flow : -40 to 40°C	ASTM E831	2.1E-5 cm/cm/°C
Vicat softening temperature	Vicat softening temperature --	ISO 306/B120	149 °C
Vicat softening temperature	Vicat softening temperature	Vicat softening temperature --	ASTM D15259	147 °C
Hot deformation temperature	Hot deformation temperature 1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Af	139 °C
	Hot deformation temperature	Hot deformation temperature 1.8 MPa, Unannealed, 3.20 mm	ASTM D648	139 °C
	Hot deformation temperature	Hot deformation temperature	Hot deformation temperature 0.45 MPa, Unannealed, 3.20 mm	ASTM D648	147 °C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Across Flow : -40°C	ISO 11359-2	7.0E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Across Flow : -40 to 40°C	ASTM E831	7.5E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Flow : -40 to 40°C	ISO 11359-2	2.3E-5 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	Water absorption rate Equilibrium, 23°C, 50% RH	ISO 62	0.040 %
Water absorption rate	Water absorption rate	Water absorption rate Saturation, 23°C	ISO 62	0.10 %
Shrinkage rate	Shrinkage rate 3.20 mm，Flow	Internal Method	0.10 - 0.40 %
Melt Volume Flow Rate (MVR)	Melt Volume Flow Rate (MVR) 280°C/5.0 kg	ISO 1133	2.00 cm3/10min
melt mass-flow rate	melt mass-flow rate 280°C/5.0 kg	ASTM D1238	3.2 g/10 min

IMPORTANT NOTES: vnplas.com collected the data in the data sheet from the material manufacturers. vnplas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.