ABS TAIRILAC® AG15E1 FORMOSA NINGBO

Unit Price:
US $ 1,338 /MT
Packaging Specification:
25KG/túi
Packaging Material:
Keo dán túi
Supply Quantity:
19MT (1 Container | Container 19MT / 20Feet)
COA Certificate:
Provide
Delivery Terms:
CIF
Port Of Destination:
Saigon Port
Material Comparison:
ABS TAIRILAC® AG15E1 FCFC TAIWAN

Material Description

Material Properties:Độ bóng cao｜Tính năng: Độ bóng cao｜Tác động kháng cao
Typical Applications:Lĩnh vực điện tử｜Lĩnh vực điện｜Giày cao gót｜Đồ chơi｜Vỏ đồng hồ｜Vỏ âm thanh｜Va-li.
Color:--
Grade:Lớp ép phun

Material Certification

RoHS

SGS

Technical Data Sheet Compare

Basic Performance	Test Condition	Test Method	Test Result
melt mass-flow rate	melt mass-flow rate 220℃×10kgf(98N)	ASTM D-1238(ISO 1133)	20 g/10min
melt mass-flow rate	melt mass-flow rate 200℃×5kgf(49N)	ASTM D-1238(ISO 1133)	1.8 g/10min

Basic Performance

Test Condition

Test Method

Test Result

melt mass-flow rate

220℃×10kgf(98N)

ASTM D-1238(ISO 1133)

20 g/10min

melt mass-flow rate

200℃×5kgf(49N)

ASTM D-1238(ISO 1133)

1.8 g/10min

mechanical properties	Test Condition	Test Method	Test Result
Shore hardness	Shore hardness 23℃	ASTM D-785(ISO 2039/2)	R-110
tensile strength	tensile strength 23℃	ASTM D-638(ISO 527)	530(52) kg/cm2(MPa)
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap 23℃	ASTM D-256(ISO R180)	14(137) kg.cm/cm(J/m)
bending strength	bending strength 23℃	ASTM D-790(ISO 178)	870(86) kg/cm2(MPa)
Bending modulus	Bending modulus 23℃	ASTM D-790(ISO 178)	28000(2750) kg/cm2(MPa)

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	Hot deformation temperature Unannealed 18.6kg/cm2 (1/2"厚)	ASTM D-648(ISO 75/A)	88 °C
Hot deformation temperature	Hot deformation temperature	Hot deformation temperature Annealed (8℃×8hr)	ASTM D-648(ISO 75/A)	100 °C
Vicat softening temperature	Vicat softening temperature 1Kg load	ASTM D-1525(ISO 306)	103 °C
Combustibility	Combustibility FILE NO E162823	UL 94	1/16"HB All Color

Physical properties	Test Condition	Test Method	Test Result
density	density 23℃/23℃	ASTM D-792(ISO 1183)	1.05

Physical properties

Test Condition

Test Method

Test Result

density

23℃/23℃

ASTM D-792(ISO 1183)

1.05

IMPORTANT NOTES: vnplas.com collected the data in the data sheet from the material manufacturers. vnplas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.