impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	Charpy Notched Impact Strength -30°C	ISO 179/1eA	5.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	Charpy Notched Impact Strength 23°C	ISO 179/1eA	15 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap -30°C	ISO 180/1A	5.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap 23°C	ISO 180/1A	15 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus	Tensile modulus	ISO 527-2/1	2300 Mpa
tensile strength	tensile strength Yield	ISO 527-2/50	55.0 Mpa
tensile strength	tensile strength	tensile strength Break	ISO 527-2/50	50.0 Mpa
Tensile strain	Tensile strain Yield	ISO 527-2/50	5.0 %
Tensile strain	Tensile strain	Tensile strain Break	ISO 527-2/50	30 %
Bending modulus	Bending modulus	ISO 178	2200 Mpa
bending strength	bending strength	ISO 178	75.0 Mpa

injection	Test Condition	Test Result
drying temperature	drying temperature	100 to 120 °C
drying time	drying time	2.0 to 3.0 hr
Hopper temperature	Hopper temperature	60 to 80 °C
Temperature at the rear of the barrel	Temperature at the rear of the barrel	240 to 260 °C
Temperature in the middle of the barrel	Temperature in the middle of the barrel	260 to 280 °C
Temperature at the front of the material cylinder	Temperature at the front of the material cylinder	280 to 300 °C
Spray nozzle temperature	Spray nozzle temperature	260 to 280 °C
Processing (melt) temperature	Processing (melt) temperature	280 to 300 °C
Mold temperature	Mold temperature	80 to 120 °C

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	Hot deformation temperature 1.8 MPa, Unannealed, 4.00 mm, 100 mm Span	ISO 75-2/Ae	115 °C
Vicat softening temperature	Vicat softening temperature --	ISO 306/B50	135 °C
Vicat softening temperature	Vicat softening temperature	Vicat softening temperature --	ISO 306/B120	140 °C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Flow : 23 to 80°C	ISO 11359-2	7.0E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion Across Flow : 23 to 80°C	ISO 11359-2	7.0E-5 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
Melt Volume Flow Rate (MVR)	Melt Volume Flow Rate (MVR) 280°C/5.0 kg	ISO 1133	8.00 cm3/10min
Water absorption rate	Water absorption rate Saturation, 23°C	ISO 62	0.23 %
Water absorption rate	Water absorption rate Equilibrium, 23°C, 50% RH	ISO 62	0.060 %

Physical properties

Test Condition

Test Method

Test Result

Melt Volume Flow Rate (MVR)

280°C/5.0 kg

ISO 1133

8.00 cm3/10min

Water absorption rate

Saturation, 23°C

ISO 62

0.23 %

Water absorption rate

Equilibrium, 23°C, 50% RH

ISO 62

0.060 %

IMPORTANT NOTES: vnplas.com collected the data in the data sheet from the material manufacturers. vnplas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.